Westward 10F636 Instrucciones De Operación Y Manual De Piezas página 10

Westward Operating Instructions and Parts Manual
STEP 7：
1. Loosen the wing nut and move the
handle to the lowest position to close
adjustable plates.
2. Move the handle to the highest position
to open the adjustable plates.
3. If the adjustable
completely open when the lever is in the
highest position, loosen the bottom nut
on the control rod.
4. Use your hand and match up the holes
on the hopper and adjustable plate so
NOTE: The holes in the bottom of the hopper and the adjustable plate need to line up.
70 Lb. Broadcast Salt Spreader
plates are not
they are fully open.
5. Retighten the control rod nut and check
to make sure the adjustable plate
operates properly when the lever is
moved to the lowest and highest
positions.
6. Insert the screen (#48) and attach rain
cover (#51).
7. Tighten all hardware before operating
the spreader.
10
10F636