Shark Vancore 2 Manual De Instrucciones página 12

TEXTILE
A
D
Dismantling
Inside textile parts can be fully dismantled. Turn
over the helmet, open the chin strap buckle.
Unclip cheek Velcro, and release chin strap
from its loops (A).
Unclip Velcro from both ends of the neck pad
and release the rear plastic part (B).
12
B
E
Remove the front plastic support from Its loca-
tion. To end it, remove the cap.
REPLACE
Insert the front plastic part of the cap in its
location (D). Put back the rear plastic part and
clip back Velcro (E).
Slide in the chin straps into its loops (F). Put back
cheek Velcro. Check that cap is well positioned.
C
F