Fuse Replacement - Chauvet DJ INTIMIDATOR BEAM LED 350 Guía De Referencia Rápida

Intimidator Beam LED 350 QRG
What Is
Included
To Begin
Product
Description
Product Overview
AC Power
Power Linking

Fuse Replacement

• Intimidator Beam LED 350
• Hanging bracket with mounting
hardware
Unpack your Intimidator Beam LED 350 and make sure you have received
all parts in good condition. If the box or contents appear damaged, notify
the carrier immediately, not Chauvet.
The Intimidator Beam LED 350 is a compact, feature-packed 75W moving
head with a frost effect that can shift the beam to a wash. A fixed gobo
wheel with animation effects and a 3-sided prism that splits the beam
provide complex looks over a large coverage area. Power linking saves
time running cords, and built-in sound-activated programs dance to the beat
of the music.
Power In
Power Out
Safety Loop
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 3 Intimidator Beam LED 350 products at 120 VAC and 7
units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight
out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
• Power cord
• Warranty card
• Quick Reference Guide
LED Display
3
Fuse Holder
DMX In/Out
EN