Publicidad
Section 3
Install Deck Assembly
Step 1
516.23 478.90
Align and
Press Up Here
Step 1
Install the deck assembly on the vehicle.
The molded side of the deck assembly rests on top
of the sport bar padding.
Line up the holes through the footpad on the deck
assembly with the holes in the rear of each door
rail. Install a knob #478.90 through each hole.
Do not tighten the knobs at this time.
TIP: You can use a small screwdriver to help align
the Top Deck Assembly and Door Rail. Be sure to
align the pieces and press up from below when
installing the knobs.
P6 - 52450 Rev. E 0416
Installation Instructions - Sunrider for Hardtop
Hardware
Top Deck Assembly
Qty. 1
Part # 516.23
Knob
Part # 478.90
available for this step and a small step stool
Qty. 1 per side
or ladder to reduce the difficulty installing the
Be sure to inspect and align the pieces and
press up from below when installing the knobs.
NOTICE
It will be helpful to have two (2) people
Top Deck Assembly.
© 2016 Bestop, Inc.
Page 6
Publicidad
