Publicidad
Section 5
Install Rear Attach Brackets
Step 1
517.10 514.48
Rear Attach Bracket locations
Step 1
Using the 4mm Allen wrench, install the Rear Attach
Brackets #517.10 with two (2) M6 x 20mm Flanged
Screws per bracket.
The brackets are installed on the underneath side
of the Sunrider injection-molded rear assembly,
and secure the Sunrider for Hardtop to the vehicle
hard top.
One bracket for each side of the vehicle.
P8 - 52450 Rev. E 0416
Hardware
Rear Attach Bracket
Qty. 2
Part # 517.10
Flanged Screw
M6 x 20mm
Part # 514.48
Qty. 2 per bracket
Installation Instructions - Sunrider for Hardtop
4mm
Allen Wrench
NOTICE
Use caution when aligning the parts
to avoid cross-threading or stripping
screws during installation.
Page 8
© 2016 Bestop, Inc.
Publicidad
