Data Log Setting; Data Log Function; To Start Data Record; To Stop Data Record - Bresser 7003500 Manual De Instrucciones

If you are not locate in above region, please select the most suitable Region Setting and manually adjust
your settings.
- WI-FI connection setup is in SETUP WI-FI CONNECTION section.
4.9.8.1 ERASE ALL DATA
Prior to and during installation of the 7-in-1 Multisensor, the sensors were likely to be triggered,
resulting in erroneous measurements and data. User may clear out all these data from the
console when the final installation is completed and start afresh.
4.9.9

DATA LOG SETTING

In this section, press
# Sub item
a Data log
b Record interval
c Clear data log
d Record start
e Data log remain

5. DATA LOG FUNCTION

You can use the USB 2.0 flash drive to record the weather data for further analysis.

5.1 TO START DATA RECORD

1. Format the USB flash drive to fat 32 with PC.
2. Plug the drive to the console USB port.
3. In "Data log" setting (section 4.9.9), select "enable" to start data record.

5.2 TO STOP DATA RECORD

1. In " Data log" setting (section 4.9.9), select "disable" to stop data record.
2. Un-plug the USB flash drive

5.3 DATA FORMAT AND OPERATION

When you view the USB flash drive, There may have several files listed which is base on .
The file name is: Data_YYYYMMDD_HHMMSS.csv
YYYYMMDD is the file creation date
HHMMSS is the file creation time
Each csv file can record 7 days data that start at Sunday 00:00, once the file complete it will generate
another csv file to record the data for next 7 days.
/ key to select the sub items.
Operation / Description
Press / key to enable or disable the data log function
Press / key to select the record interval between 5, 10 or 30 minutes
Press key to enter clear data log screen
Show the record start date and time
Show the data log storage remain
82
a
b
c
d
e