Velleman HQ Power PAA01 Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

AM/FM + MEDIA PLAYER (PAA02 only)
a
AM/FM
b
MP3
c
MEMORY
d
USB/SD (M1)
e
REP (M2)
f
EQ (M3)
g
USB CONNECTOR
h
LCD
i
SD/MMC CARD SLOT insert SD/MMC card (not incl.)
j
k
VOL-
l
(M4)
m
n
VOL+
o
/
(M5)
6. Troubleshooting
The amplifier stops working.
Turn the volume knobs of both channels to zero, switch off the amplifier and disconnect from the
mains. Check the front panel, the fuse and all input and output connections. Replace the fuse with a
fuse of the same type and ratings.
No sound when power LED is switched off.
The power supply is not connected or the amplifier has a blown fuse. Check the power connections
and switches, or replace the fuse located below the power input.
No sound when power LED is switched on.
No or low input, or faulty speakers. Check if the input is connected and if the LED shows the
presence of a signal. Gently increase the volume level and check the speakers and speaker
connections.
Hum or buzz.
Power supply noise is picked up in the signal path or earth problem. Only use good quality, shielded
signal cables and ensure they are kept away from the power cables and other AC-powered
equipment. Use a mains tester to ensure the mains outlet has a good earth.
Distorted sound.
There is an excessive signal level or damaged signal cables. Check the LED to ensure the input level
to the amp is at the correct level. Only use good quality, shielded signal cables and protect them
from damage.
Sound cuts out.
The signal cables are damaged or the connectors are not properly inserted. Check all cables and
connections.
7. Maintenance
Regularly wipe the amplifier with a moist, lint-free cloth. Do not use alcohol or solvents.
Ensure that liquids are not spilled into the enclosure through the ventilation openings.
Contact your HQPower™ dealer if your amplifier needs servicing.
V. 03 – 29/03/2012
PAA01/PAA02
select AM / FM
select MP3
press memory followed by a preset key (M1 – M5); the LCD indicates the
frequency
select USB or SD card input
select repeat mode: repeat one, repeat all, random
select equalizer mode: classic, pop, rock, jazz, flat
connect USB device (not incl.)
display working status and information
radio mode: move backwards on the frequency band
other modes: return to the start of the program
decrease volume
press to play/pause
radio mode: move forward on the frequency band
other modes: skip to the end of the program
increase volume
switch power on or off or stop playback
7
©Velleman nv

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hq power paa02

Tabla de contenido