Assembling The Flower Steps - Gardenline 94229 Manual Del Usuario

Assembling the flower steps

WARNING!
Risk of injury!
Improper handling of the flower steps' components may result
in personal injury.
− Always wear the appropriate protective equipment during
assembly (e.g., steel-toed gardening boots, gardening or
work gloves, protective eyewear, etc.).
− Keep children and pets away from the work area and
away from the flower steps' components. The flower steps
contain small parts that may cause a choking hazard.
− Do not let children play with the flower steps' components.
These components are not toys for children.
− Find a flat, level area near the location where you want to place the flower
steps. Ensure the flower steps' components are handy.
Before tightening any screw, assemble all the parts first so that
you can adjust their positions as necessary.
1. Lay out one shelf
holes on the curved side of the shelf with the short ornamental fringe.
Loosely fasten the ornamental fringe to the shelf with two M6 × 12 mm
(see Fig. B).
screws 9
Repeat for the remaining shelfs and short ornamental fringes.
2. Lay out the main frame
frame to the left side of the shelf. Loosely secure them with two M6 × 30 mm
(see step 1 in Fig. C).
screws 10
3. Lay out the large L frame
the screw holes on the two parts with those on the right side of the shelf.
Loosely secure them with two M6 × 30 mm screws (see step 2 in Fig. C).
4. Attach another shelf (with short ornamental fringe) to the upper supporting
plates 13 of the frames, and loosely fasten them with two M6 × 12 mm
screws (see step 1 in Fig. D).
5. Lay out the medium L frame
screw holes on the two parts with those on the right side of the shelf.
Loosely secure them with two M6 × 30 mm screws (see step 2 in Fig. D).
and one short ornamental fringe
5
and one of the assembled shelf. Attach the main
1
2
and a long ornamental fringe
3 and a long ornamental fringe. Align the
Assembling the flower steps
. Align the screw
7
6 . Align
11