Pre-Use Instructions; Checking For Leaks - Real Flame 1726LP Manual Del Propietário

PRE-USE INSTRUCTIONS

! WARNING
Before using this fire column, make sure you have read, understand, and are following all
information provided in this manual. Failure to follow these instructions could cause property
damage, serious injury or death.

Checking for Leaks

Make a leak check solution by mixing one part dish-washing soap with three parts water in a spray
bottle.
Make sure that the control knob on the fire column is in the OFF position, then connect your fire
column to a LP gas tank and turn the tank's valve on.
Spray leak solution on the valve connections, paying particular attention to the areas indicated in
the diagrams below by arrows.
If bubbles appear, close the tank valve, disconnect the tank, and inspect all connections making
sure threads are clear of debris. Reconnect the LP tank and re-test. If you continue to see bubbles,
turn the LP gas tank off, disconnect it and call Real Flame at 1-800-654-1704 for assistance.
If no bubbles appear after one minute, wipe away excess leak solution and proceed to the next
step.
Pay close attention to the areas indicated by the arrows
9