Klarstein DELOREAN Manual Del Usuario página 34

EN
34
Step 1: Correct placement of the cooker hood
In the planned installation area, draw the following reference lines:
• A vertical line to the ceiling or to the top of the installation area, in the middle of the
area where the cooker hood is to be mounted.
(A) A horizontal line A, at 980-1080 mm above the cooker top.
(B) A horizontal line B, at a minimum 926 mm (868 mm optional) above the cooker
top.
(C) A horizontal line C, at a minimum 656 mm above the cooker top.
Step 2: Mark drill holes
• Mark a point (1) on the horizontal line A, 60 mm to the right of the vertical
reference line.
• Repeat this operation on the other side, checking that the two marks are levelled.
• Mark a point (2) on the horizontal line B, 80 mm (135 mm optional) to the right of
the vertical reference line.
• Repeat this operation on the other side and on the vertical reference line, checking
that the three marks are levelled.
• Mark a point (3) on the horizontal line C, 80 mm to the right of the vertical
reference line.
• Repeat this operation on the other side, checking that the two marks are levelled.
Step 3: Fix the brackets (optional)
• Drill at the marked points (1) (2) (3), using a Φ10 mm drill bit.
• Insert the wall plugs (1 1) into the holes (1) (2) (3).
• Fix the hood fixing bracket (20) with 3 (5 x 50) screws (10) supplied with the hood.
• Fix a chimney fixing bracket (21) with 2 (5 x 50) screws (10) supplied with the
hood.