Jocel JATP014054 Manual De Instrucciones página 21

STEP 5: Attach Flame Screen (16) to the top of Support Bar-Upper (21) and fix the connection using 2pcs
M5 screws and washers (See FigureⅠ,Ⅱ).
Repeat this step and connect Flame Screen (16) to other 3 sets Support Bars-Upper. (See Figure Ⅲ, Ⅳ)
STEP 7: Unscrew 8pcs M5 Screws and Washers preassembled on top of tank housing assembly.
Place the Side panel fixed parts to top of tank housing assembly. Make sure match the top ends
of tank housing assembly with the slot of Side panel fixed parts. Match the threaded hole and fix
each connection with 2pcs M5 Screws and Washers.
STEP 6: Place Aluminum cover (17) on the Flame Screen
(16) and fix the connection using 4pcs M5 CAP NUT.
21