Home Decorators Collection 91176 Guía De Uso Y Cuidado página 7

Assembly - Hanging the Fan
1
Attaching the fan to the electrical
box
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (FF)
(not included) may be needed to insert between
the outlet box and mounting plate.
□
Turn the power off.
□
Securely attach the mounting plate (A) to the outlet box (EE)
using the two screws (GG) supplied with the outlet box (EE).
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (EE) and through the hole in the
mounting plate (A) and lay them to the side.
2
Hanging the fan-motor assembly
□
Carefully lift the fan-motor assembly (B) and engage the
slot in the motor bracket on the top of the fan- motor
assembly (B) with the hook on the mounting plate (A) so
that it is securely suspended. Then connect the wiring
to your fan according to step 3 "Making the Electrical
Connections".
□
Once the wiring is completed, lift the fan-motor assembly
EE
(B).
FF
□
Align the holes in the mounting plate (A) with the pre-
A
attached screws (HH) on the motor bracket (II).
□
Securely tighten the screws (HH).
GG
A
HH
II
B
7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
A
B