Extremis WALRUS Instrucciones De Montaje página 7

5. Now attach the arm rests to the frame, using 3 M8x20 bolts for each arm rest and an M8 flat washer on each bolt.
PLEASE NOTE
: make sure the holes match up, and then tighten all the bolts in the arm and backrest.
tighten the bolt at the front first
If you want to link the modules together using the connector, it is best to do this before you attach the seat
cushion to the frame. You will find instructions for linking the modules with the connector on page 11.
6. Place the seat cushion on the frame and fix it in place by attaching the Velcro straps to the two rods in the middle.
OPTIONAL
1. Open the cover of the back rest. Attach the blanket to
the backrest using the glass fibre rod (L = 985 mm)
included with the blanket.
1
3
2
1
, then the one at the back
2
and lastly the one in the middle
2. Drape the blanket over the sofa and add the cushion.
TIP
:
3
.
english 7