Aqua Medic LEDspot 100 Manual Del Usuario página 10

Fig. 4: Flat sealing (1), passe-partout (2)
LEDspot 200 W:
Fig. 5: Sequence for the 200 W spot:
1. Retaining ring
2. Lens
3. Silicone retaining ring
4. Passe-partout
5. Flat sealing
6. Electric connection:
LEDspot
The can be connected to a timeswitch or a PWM timer if automatic operation is desired
or can be controlled by 0 – 10 V (e. g. Qube Control plus power supply and control cable). A
power plug is not included. The cable for the power supply and the control cable come out of the
light from above and must not be mixed up.
When working on the light, always pull all power plugs!
By using the control unit Aqua Medic sunrise control, the LEDspots can be dimmed. Please consider
that the program has to be inverted. Where 100% light is desired, the program has to be set to
0%, where the light should be dimmed down completely, 100% has to be set (see Fig. 6).
10