Aqua Medic LEDspot 100 Manual Del Usuario página 11

Fig. 6: Program's example. Only the „white channel" is used.
A special control cable is required for controlling the unit. By using the plug that came with the
spot, the control cable is connected waterproof to the control cable of the spot.
The LED spot 200 W can not be dimmed down completely due to the built-in ballast. Therefore, the
sunrise control has to be switched off completely after the program has ended by an additional
timer. In the morning, it has to be started again before the program starts. The sunrise control is
equipped with its own power supply.
Fig. 8: Mean Well electronic ballast for LEDspot 200 W (HLG-240H) and 100 W (HLG-
120H)
11