or operate when it is empty. Stainless Steel Blades should be handled with extreme care
when removing, assembling, cleaning, or storing.
1. Make sure the blade is positioned correctly on the center shaft, handling with care.
2. Place food in the work bowl without overfilling the appliance. We recommend pre-
chopping any large foods to make processing easier.
3. Secure the lid on the work bowl by turning it counterclockwise to lock.
4. Plug the appliance into an electrical outlet. Press the LOW 'I' or HIGH 'II' pulse button
to process. To turn off, release the button. Do not continuously run the appliance for
more than 30 seconds.
5. Remove Motor Unit by lifting it off the secured lid. Unlock the lid from work bowl
from the base by turning clockwise. Do not remove the lid until the blades have
completely stopped moving.
6. When all desired food has been processed, disconnect appliance from the electrical
outlet.
7. Carefully remove blade assembly and transfer your processed food using the included
spatula.
8. If your processed food sticks to the chopper bowl, please remove pressure from the
button and unplug from power. Use a spatula to scrape off the sides of the chopper
bowl and start the processing again.
9. This item cannot be used for grinding beans, rice, or frozen meat or anything that is
too hard or has too much liquid as this could damage the chopper.
10.If the food processor is shaking, it is because the food is not evenly placed. Unplug
from wall and re-position the food evenly and begin the process again.
Processing Tips:
• Cut vegetables into 1-inch chunks before processing for uniform consistency
• Puree cooked vegetables or fruits for baby food or as bases for soups and sauces.
• Tear bread into pieces then process to make breadcrumbs. Break crackers or cookies
into pieces and process into crumbs for pie crusts.
• Chop nuts; mince parsley, basil, chives, and garlic.
Cleaning Your Food Processor:
WARNING: Always unplug the unit and allow it to cool before cleaning or storing it.
• Always clean your Food Processor after each use.
• The Lid, Cup, and Blade can be washed with a soft sponge under warm water and mild
detergent or in a dishwasher.
• Motor can be cleaned with a damp cloth. NEVER IMMERSE THE MOTOR IN WATER OR
PLACE IN DISHWASHER.
• Do not use abrasive cleaners
• Reassemble the product before storing. Store your Food Processor in a cool dry place.
8