Smartpond 52282 Manual Del Usuario página 7

This kit includes a coupler and
a diverter valve. To flow water
only to the fountain nozzle only,
proceed to step 7. To flow water
to the fountain nozzle and a
spitter, skip to step 10.
Step 7. Connect the two
extension tubes with the coupler.
Step 8. Connect the fountain
nozzle to the top of the extension
tube.
Step 9. Place the assembled filter
kit in water, and skip to step 14.
Step 10. Connect the extension
tubes to the diverter valve. Make
sure the arrow is pointing up and
the diverter valve is connected as
shown.
Step 11. For the use of the
diverter valve, connect 1/2-in ID
tubing onto the second output of
the diverter valve. Connect the
other end of tubing to a spitter or
other water feature.
NOTE: Tubing and spitter are not
included.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
7
8
Fountain
head
Filter box top
9
10
11
5