Radio Transmitter For Control Pedals - Noxon High Speed Cablecam Manual De Usuario

Radio transmitter for control
English
pedals
1. Switch to change control from pedals to stick.
2. Switch to change direction. This allows you to control the cablecam from both sides. It should be
set up or down. The center position cancels the movement.
3. Speed range adjustment potentiometer. Sets the speed range for the pedals and the left stick. The
right stick always maintains the maximum speed range. A value greater than 0 must be indicated.
4. Left stick: controls the cablecam when it is moved to the right or left, it is affected by the speed
setting of the potentiometer.
5. Right stick: controls the cablecam when it is moved to the right or left, it is not affected by the
speed setting of the potentiometer.
Using the control pedals:
1. Pressing both pedals 100% will produce an emergency stop.
2. Pressing one of the pedals 100%, releasing it completely, and pressing it 100% again within one
second will produce an emergency stop. Use this functionality in case of failure of one of the pedals.
Pág. 20