SATA 97822 Manual Del Uso página 9

II. Product diagrams :
Note: The product contains 15'' mechanical when it leaves the factory. If it is to be frequently used in environments below 0 ℃ , it is
recommended to use 10" aviation hydraulic oil. Please completely drain the original 15" mechanical oil from the oil pump and add 10"
aviation hydraulic oil. Please refer to page 5 for the specific operation procedure.
III. Installation and operation:
1） Handle installation:
a）Tighten the screws to connect and install the upper and lower handles.
b）Release the positioning screw on the handle and insert the handle into the handle hole.
c）Tighten the positioning screw to complete handle installation.
2） Exhaust:
a）Release the oil filler screw but do not remove it（see Figure 2） .
b）Insert the handle into the handle hole（see Figure 1）.
97822
中文
Figure 1
Figure 2
EN DE RU KO PT JA ES
9