Maxon TE-33/GPTLR Manual De Instrucciones página 6

LIFT CORPORATION
Torque the valve cartridge to 18-22 lb-ft.
Torque the coil nut to 3-4.5 lb-ft. Do not over-
tighten.
8. Connect solenoid directional valve (Kit
item) to the pump manifold as shown in
FIG. 6-1.
9. Connect solenoid directional valve (+)
wire to power down module (FIG. 6-1A).
10. Bolt solenoid directional valve
(-) lead to ground on bottom of
pump manifold (FIG. 6-1B).
DIRECTIONAL
VALVE
DIRECTIONAL
VALVE
PUMP
MANIFOLD
© MAXON Lift Corp. 2018
CAUTION
Sht. 6 of 48 DSG#
DIRECTIONAL
VALVE COIL
(P/N 298842-01)
M-13-05
Date: 07/30/18