Charging Steps - SATA J Serie Manual Del Uso

Charging steps:

Caution:
Please read the instruction carefully before operating the machine.
Charging indication:
1.Charging:
Warning:
The charger and battery pack are designed to be used together. Do not charge the battery pack with other chargers or
charge other battery packs and the non-rechargeable batteries with this charger. Do not make any metal objects in
contact with the pole piece of charger or battery pack. Otherwise, this may cause a short circuit or circuit hazard
2. Precautions before use:
The accompanied battery pack is not charged, and the battery pack that has not been used for a long time is also low-powered
and must be charged before use. Battery pack can only be fully charged after several charge and discharge cycles. It is normal
for the short operation of machine as the machine has been used for several times at the beginning.
3. How to charge:
Charging steps:
1） Plug one end of the power cord into the charger （Figure 1） and plug other end into the appropriate power socket. Three
indica tors keep on for 2-3s and then go out.
2） Insert the battery pack into the charger and make sure it is fully inserted（Figure 2）. The indicator is flashing to indicate
that charging starts.
3） At the end of charging, three indicators are normally on, indicating that the battery pack is full. Unplug the battery pack and
charger plug.
Warning:
After the battery pack is used for a long time, or exposed to direct sunlight or hot environment, it shall be
cooled for a period of time before it can be recharged so that it can be fully charged
10
51504/51505
中文
EN DE
Figure 1
RU KO PT JA ES
Figure 2