• If the battery gives off an odor, generates heat, or in any way appears abnormal during use, recharging
or storage, immediately remove the controller from the battery charger and place it in a secure
container such as a metal box.
MOTION WARNING
Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid
problems such as tendinitis, carpal tunnel syndrome, skin irritation or eyestrain: • Avoid excessive play.
Take a 10 to 15 minute break every hour, even if you don't think you need it. Parents should monitor their
children for appropriate play. • If your hands, wrists, arms or eyes become tired or sore while playing, or
if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours
before playing again. • If you continue to have any of the above symptoms or other discomfort during or
after play, stop playing and see a doctor.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired
operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
CAN ICES-3(B)/NMB-3(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired
operation of the device
MANUFACTURED BY
Bensussen Deutsch & Associates, LLC. (BDA, LLC.)
15525 Woodinville-Redmond Rd. NE Woodinville, WA 98072 | BDAINC.com | POWERA.com
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit PowerA.com/support.
WARRANTY
2-Year Limited Warranty: Visit PowerA.com/support for details.
AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within
Australia or New Zealand, this product comes with a One-year warranty from date of purchase. Defects
in the product must have appeared within One year from date of purchase, in order to claim the
warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance
with the retailer's return policies and procedures. Any expenses incurred, as a result of returning the
product to the retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra, Australia VIC 3141
bluemouth.com.au | Email: support@bluemouth.com.au | +61 (3) 9867 2666
ADDITIONAL LEGAL
PowerA, and the PowerA logo are trademarks of Bensussen Deutsch and Associates, LLC. TM and ©
Bensussen Deutsch and Associates, LLC. Microsoft, Xbox, Xbox Series X|S, Xbox One, Xbox One Elite,
Xbox One Elite Series 2, and Windows are trademarks of the Microsoft group of companies. All other
trademarks are the property of their respective owners.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol name.
The WEEE (Waste of electrical and electronic equipment) symbol requires battery disposal
outside of other household waste per local regulations. Contact your city office, waste
disposal service, or retailer for guidance.
CE (Conformité Européene aka European Conformity) is a certification mark that indicates
conformity with health, safety, and environmental protection standards for products sold
within the European Economic Area.
The Regulatory Compliance Mark is a visible indication of a product's compliance with all
applicable ACMA (Australian Communications and Media Authority) regulatory arrangements,
including all technical and record-keeping requirements regarding the electrical safety and/
or electromagnetic compatibility (EMC).
DECLARATION OF CONFORMITY
TRADE NAME: Power A | MODEL NO.: 1510706-01
US COMPANY NAME: Bensussen Deutsch & Associates, LLC.
ADDRESS: 15525 Woodinville-Redmond Road, NE Woodinville, Washington 98072-6977 United States
INTERNET CONTACT INFORMATION: BDAINC.com | POWERA.com
Hereby, Bensussen Deutsch & Associates LLC at 15525 Woodinville-Redmond Road NE, Woodinville, WA
98072 USA, declares that this wireless controller is in compliance with Directive 2014/53/EU. The full text
of the EU Declaration of Conformity is available at the following internet address: PowerA.com/compliance
PRODUCT DETAILS
BLUETOOTH: 2402-2480 MHz | MAX E.I.R.P.: < 10dBm (for EU compliance)
WIRELESS CHARGER: 110.417- 145.513 kHz | MAX POWER TRANSMITTED: 3.88 dBuA/m @10m distance
INPUT: 5v, 500 mA | OUTPUT: 5V, 1000 mA | OPERATIONAL TEMPERATURE: 50-113°F (10-45° C)
FRANÇAIS INSTRUCTIONS
CONTENU
• Manette MOGA X P7-X+
• Support de téléphone détachable
• Un câble micro USB vers USB standard de 2 m
• Un câble micro USB vers USB type-c/micro USB de 30 c m
• Manuel de l'utilisateur
INSTALLATION
Pour obtenir de meilleurs résultats, chargez entièrement la manette et la batterie de secours avant la
première utilisation.
CHARGER LA MANETTE ET LA BATTERIE DE SECOURS
• À l'aide du câble USB de 2 m fourni, reliez le connecteur Micro USB au port situé sur le haut de la
manette et reliez le connecteur USB standard à n'importe quelle source d'alimentation USB.
• Lors de la charge, quatre LED signaleront le niveau de charge de 25, 50, 75 et 1 00 % .
INDICATEUR DE NIVEAU DE CHARGE
Vérifiez le niveau de charge de la batterie en appuyant sur le bouton d'état de la batterie ( ) sur la
partie inférieure gauche à l'avant de la manette. Les LED indiqueront l'actuel niveau de charge, de 2 5 à
100 % , même si la manette est éteinte.