Publicidad
Idiomas disponibles
Idiomas disponibles
LIFT CORPORATION Sht. 14 of 42 DSG#
25. Reconnect power to the pump
by reconnecting positive (+) and
negative (-) cables to battery
(FIG. 14-1). Reinstall and tighten
nut when each battery cable is
reconnected.
CAUTION
The hand pump is only intended
CAUTION
for stowing the platform if the
power unit does not work. Do not
use for repeated loading and un-
loading of vehicle.
26. Open the needle valve by turning knob
fully counterclockwise (FIG. 14-2).
© MAXON Lift Corp. 2020
POSITIVE (+)
BATTERY POST
NUT
NEGATIVE (-)
BATTERY CABLE
RECONNECTING POWER
OPENING NEEDLE VALVE
M-16-16
Rev. A Date: 04/22/20
POSITIVE (+)
BATTERY CABLE
NEGATIVE (-)
BATTERY POST
FIG. 14-1
FIG. 14-2
Publicidad
