Transportation Requirements; Preparing The Appliance; Positioning The Outdoor Unit - BALAY 3XD620H Instrucciones De Uso

Requirements for use

Transportation requirements

• The indoor unit is fitted with wheels to
make transportation easier.
• To make transporting the entire
appliance easier, hang the outdoor unit
onto the indoor unit as shown in Fig. 6.
First, insert the lower extremities (A) and
then the upper bar ( B) of the outdoor
unit into the indoor unit.
B
Preparing the appliance before use

Positioning the outdoor unit

The outdoor unit can be set in any of the
three positions shown in figures 8, 9 and
10, depending on the preference of the
user and space conditions. Remember
that it should be positioned on a surface
as near to horizontal as possible, with a
maximum inclination of 3
the Support Plate accessory to hang the
outdoor unit from its hook.
A
Fig. 6
. Fig. 11. Use
0
• If it is necessary to tilt the appliance in
order to transport it, empty any water
from the internal tank by removing the
drainage tube from its housing and
removing the plug, Fig. 7 to drain any
water deposited. Do not forget to
replace the plug and reinsert the pipe in
its housing when the tank is empty.
• You should not turn the appliance back
on again for a minimum period of one
hour.
• If you are only transporting the outdoor
unit, first disconnect the appliance,
remove plug C, Fig. 2 from the outdoor
unit, tilt it slightly and empty any water it
may contain.
Important!
If you notice water on the base of the
outdoor unit, this is a perfectly normal
consequence of appliance operation
and is not a cause for concern.
Fig. 8
57
Fig. 7