Joining The Flexible Hose To The Indoor Unit - BALAY 3XD620H Instrucciones De Uso

Preparing the appliance before use
2
• Keep tab A, which secures the position
of the lever, pressed in. Pull it upwards
(be careful with the spring of the lever),
making sure that it remains at its
maximum height, Fig. 21.
• Pull the hose off its housing guides. Fig.
22.
1
Fig. 20
Fig. 21
Fig. 22
60
In the event of the indoor and outdoor
units being disconnected for a long
period of time, protect the free end of
the hose against dirt and dust by
fitting the protection cap (See Fig 23).
Before connecting the two parts
again, it is recommended that you
clean any dirt which has built up on
the indoor unit connection with a
clean, dry cloth.
Important!
To prevent the risk of refrigerant loss,
we do not recommend that the hose
be left disconnected from the indoor
unit for more than one day. Never
operate the indoor unit without the
outdoor unit.
Joining the flexible hose to the
indoor unit
Connect the flexible hose back onto the
indoor unit by following the steps
described above in reverse order.
If the rubber cap is fitted on the free end
of the hose, remove it and position it as
shown in Fig. 24 before fitting the entire
assembly onto the indoor unit.
Fig. 23