Lock Button; Installation Rules - Vimar EVLOX Giotto 6329 Instrucciones Instalador

6329, 6329/C, 6329/CD
with display.

Lock Button

The lock button of each device works in the following manner.
- Device with handset at rest
panel with which it has spoken or from which it has been
called.
- Device with handset raised but not engaged in a conversa-
tion call to switchboard if the Switchboard flag is
YES. Otherwise it goes back to the first case.
- Device with handset raised and engaged in an internal con-
versation as in the first case.
- Device with handset raised and engaged in an external con-
versation or called from entrance panel lock
entrance panel being spoken with or from which it has been
called.
In practice a lock is always activated except when the handset
is raised and you immediately press the lock button. This can
also be taken to the standard case if the system has no porter
switchboard and the Switchboard flag is set on NO.

Installation rules

Installation should be carried out by qualified personnel
in compliance with the current regulations regarding the
installation of electrical equipment in the country where the
products are installed.
lock to the last entrance
Conformity
EMC directive
Standards EN 61000-6-1 and EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The
product may contain traces of lead.
to the
at the end of its working life. The user must take the worn
product to a sorted waste center, or return it to the retailer
when purchasing a new one. Products for disposal can
be consigned free of charge (without any new purchase
obligation) to retailers with a sales area of at least 400m
if they measure less than 25cm. An efficient sorted waste
collection for the environmentally friendly disposal of the
used device, or its subsequent recycling, helps avoid the
potential negative effects on the environment and people's
health, and encourages the re-use and/or recycling of the
construction materials.
EN
WEEE - Information for users
If the crossed-out bin symbol appears on the
equipment or packaging, this means the product
must not be included with other general waste
,
2
13