Level One HDBaseT Serie Guía De Instalación Rápida página 6

Installation
1. Turn off power of all connecting equipment, including video sources
and displays.
2. Connect all cable referring to diagram or designed topology. Attach
power cable, HDMI cables from video source to Transmitter and
from Receiver to displays, Ethernet cables connecting between
Transmitters and Receivers. Optional connection for RS-232, IR
cable if required.
3. AWARE with IR cables connection. Wrong wiring of cables may
cause fatal damage to the receptacle of IR cables.
IR IN = Cable with the ROUND type module
IR OUT = Cable with the STICK type module
4. Turn on extenders power first, display devices, lastly video sources.
5. The built-in EDID management will automatically select the
resolution setting that could successfully display to all connected
screens (local and remote). Usually the setting of lowest resolution
display is selected. EDID management refreshes setting when
display devices are plugged or unplugged.
6