Battery Installation - Oregon Scientific RM962 Manual Del Usuario

F MODE button
Toggles the calendar clock display modes or activates the
calendar clock setting mode
G UP [ ] and DOWN [
Increases or decreases the value of a setting
H ALARM button
Displays the alarm time or sets the alarm status
I SNOOZE button
Activates the snooze function when an alarm activates or
turn on the back light for five seconds
J Battery compartment
Accommodates two UM-4 or "AAA" size 1.5V batteries
K RESET button
Resets the unit by returning all settings to their default
values
L Rotatable stand

BATTERY INSTALLATION

The unit uses two (2) UM-4 or "AAA" size 1.5V batteries.
To insert batteries:
1. Click open the battery door as shown.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Replace the battery compartment door.
] buttons
Note: The battery life can be reduced vastly by frequent use of
the back light or snooze function.
If not disposed of properly batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
HOW TO USE THE BACKLIGHT
Press SNOOZE once. The back light will activate for five seconds.
ABOUT RADIO RECEPTION
This unit is a radio frequency (RF) controlled clock. When located
within a 1500km radius of radio signal (DCF77) at Frankfurt,
Germany, the clock time will automatically synchronize with DCF77
time-signal transmission. The benefit of a RF controlled clock is
that highly-accurate time is maintained and manual adjustments to
the time and date are not be required.
(RM962U - UK version within a 1500km radius of radio signal
2