Bissell PROHEAT ADVANCED 1846 Serie Guia Del Usuario página 11

Emptying the 2-in-1 Tank
1
1
1-Press the Power Switch to turn the machine OFF. 2-Remove the 2-in-1 Tank by lifting
up with the tank's carry handle. 3-Carry the tank like a bucket to where you'll dispose of
the collection water. 4-Rotate the carry handle to unlatch the lid and empty the tank.
2
After each use, remove
the tank lid and rinse the
lint screen.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
2
NOTE: You may notice hair and debris deposits on
the carpet or in the tank that were loosened by the
cleaning action (especially with newer carpets that
may have never been deep cleaned before). This
debris should be picked up and thrown away.
Once your cleaning is complete, make sure the water
tank is emptied and rinsed out. Put the machine away
in a closet or basement for the next use.
NOTE: Store cleaner in a protected, dry area. Since
this product uses water, it must not be stored where
there is a danger of freezing. Freezing will damage
internal components and void the warranty.
3 4
www.BISSELL.com
11