App Control; Alarms, Snooze And Sleep; Sleep Timer - RuarkAudio R7 mk3 Guia Del Usuario

App control

You can also control your R7 and set up multi-room playback
using the Ruark Audio Link app. Find it on the Apple/Android
app store.
For more information visit www.ruarkaudio.com/support
App access PIN
Set up a PIN to restrict access to your R7 so only authorised
users can control it from the Ruark Audio Link app.
MENU > System > Network > App access PIN.

Alarms, snooze and sleep

Setting an alarm
An active alarm is indicated by the alarm icon and when it
sounds, the icon flashes.
Select MENU > System > Date and time > Alarms and
choose alarm 1 or alarm 2 using the CONTROL KNOB.
Choose when the alarm will sound (off, daily, once, weekends
or weekdays), set the time and then choose to have the alarm
EN-28
play a radio station, CD or sound a tone and choose the
volume. Finally, select save to save the alarm and exit the set
up menu.
NOTE: it is not possible to use a Bluetooth source, USB or
network music server for the alarm.
Snooze
Press the CONTROL KNOB to temporarily silence a sounding
alarm, press it again to increase the snooze period (5, 10, 15
or 30 minutes).
To cancel an alarm that is sounding or in snooze mode, press
and hold the CONTROL KNOB for two seconds.

Sleep timer

To set the time after which your R7 will automatically switch to
standby, select MENU > System > Date and time > Sleep.
Choose the delay in minutes (Off, 15, 30, 45, 60) and finally
press the knob to confirm your selection. The display then
dims to standby brightness, returns to the Now-playing screen
and displays the sleep icon.