Installing And Adjustment Instructions - Alcad TCB-040 Manual Del Usuario

VIDEOPORTERO ELECTRÓNICO - VIDEODOOR ENTRY SYSTEMS - VIDÉOPORTIER ÉLECTRONIQUE
INSTRUCCIONES DE INSTALACIÓN Y AJUSTE

INSTALLING AND ADJUSTMENT INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION ET DE RÉGLAGE
When installing the entrance panel make sure that the sunrays or intense light sources do not fall directly on the video unit,
1
Establish which is the main entrance panel in the
system (panel on which the monitor's auto switch-
on function actuates). In standard installations,
leave the J1 jumper installed. In installation of
several points of access, remove the J1 jumpers
from the rest of the panels.
3
Adjust the video unit's view angle until getting
the desired orientation.
GRF-204
19
J1
Main entrance panel
J2
J1
19
J2 J1
All other entrance panels
2
Adjust the volume level on the entrance panel and
on the monitors/telephones (1). If an adjustment
of greater precision is required, remove the J2 jumper
and repeat the adjustment (2).
J1
GRF-204
J2