6) Disposal of the product
This product constitutes an integral part of the automation
system, therefore it must be disposed of along with it.
As in installation, also at the end of product lifetime, the disassembly
and scrapping operations must be performed by qualified person-
nel.
This product is made up of different types of material, some of which
can be recycled while others must be disposed of. Seek information
on the recycling and disposal systems envisaged by the local regula-
tions in your area for this product category.
!
Some parts of the product may contain pollutant or haz-
ardous substances which, if disposed of into the environ-
ment, may cause serious damage to the environment or
physical health.
7) Technical characteristics of the MOVENO DWIRE-V tubular motors
Supply voltage and frequency
Current and power
Torque and Speed
Continuous duty time.
Protection class
Operating temperature
Precision (resolution) of the electronic limit switch
Precision of the stop positions
All technical characteristics refer to an ambient temperature of 20°C (± 5°C).
Subject to change without prior notification.
We hereby declare that this device conforms to the fundamental requirements and relevant provisions of the CE directives.
Declaration of conformity: www.stobag.com
www.stobag.com
As indicated by the symbol on the left,
disposal of this product in domestic
waste is strictly prohibited. Separate
the waste into categories for disposal,
according to the methods envisaged by
current legislation in your area, or return
the product to the retailer when purchas-
ing a new version.
!
Local legislation may envisage serious fines in the
event of abusive disposal of this product.
: See the technical data on the label attached to each model
: See the technical data on the label attached to each model
: See the technical data on the label attached to each model
: Maximum 4 minutes
: IP 44
: -20 ÷ +50 °C
: greater than 0.55° (depending on the MOVENO version)
: ± 5°
GB
17