Graef IM 700 Manual De Instrucciones página 19

Before connecting the unit, compare the connecting data (voltage and fre-
●
quency) on the type plate with those of your energy network. These details
must correspond so that no damage occurs to the unit.
Check to see that the power cable has been safely laid. Due to getting
●
caught on the cable, the unit might fall down from the work surface.
Packaging materials must not be used for playing. There is a danger of suf-
●
focation.
Never use the unit in the vicinity of a source of heat.
●
Never use the appliance outdoors, and always keep it in a dry place.
●
When filling in, after every use as well as prior to every cleaning, the plug
●
must be removed from the socket.
Do not use any aggressive or abrasive detergents and no solvents.
●
Do not scratch off stubborn soiling with hard objects.
●
Avoid unnecessary switching On and Off of the unit in order to prevent dam-
●
ages of the compressor. Keep an interval of 5 minutes between switching On
and Off the unit.
Metal sheets or other electrical objects must not be inserted into the unit in
●
order to avoid fire or a short circuit.
When taking out ice cream, do not knock on the surface or the margin of the
●
container with an other object in order to avoid damage of the container.
Do not start the unit if the ice cream container or the stirring whisk have not
●
been properly inserted.
Ensure that the unit is not tilted more than 45°, because this can damage the
●
compressor.
The mains cable connector and the ventilation should not be soaked. Do not
●
immerse the unit in water or other liquids, in order to avoid an electrical shock.
Make sure that the ventilation slots are not blocked at any time.
●
During operation, do not hold any objects into the running unit and do not
●
reach into it with your hands.
In the unit, do not store any flammable or explosive substances such as aero-
●
sol containers with flammable propellant gas.
WARNING: Risk of fire!
The cooling circuit contains the coolant R600a, a natural, environmentally
friendly gas which is flammable. Make sure that the cooling circuit is not
damaged during transport or installation.
DE
EN
FR
NL
IT
ES
DK
SE
NO
PL
HU
UKR
19