Cleaning And Maintenance; Problems And Solutions - Domo DO336L Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38

CLEANING AND MAINTENANCE

APPLIANCE
·
Remove the plug from the socket prior to cleaning the machine.
·
After each use, clean the machine with a dry or slightly damp, soft cloth.
·
Remove all particles of bags that you have sealed from the sealing strip of the machine with a soft
cloth. Only clean the sealing strip once it has cooled completely.
·
Clean the vacuum chamber with a soft, moist cloth.
·
The sealing ring on the vacuum chamber can be removed. Take care not to damage it as air may
otherwise escape from the vacuum chamber. Always ensure that the sealing ring is completely dry
during use.
·
Do not expose the machine to extreme temperatures, moisture, shock, dust or direct sunlight.
·
Do not drop the machine.
·
Never use corrosive or abrasive products to clean the machine.
·
Dry carefully before use.
! Make sure that no fluids get into the machine.
·
! To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other
·
liquid.
FOIL BAGS
The bags can be cleaned for reuse.
·
Clean the bags in warm water using a mild detergent.
·
The bags are dishwasher-safe. Turn the bags inside out so that the entire surface comes into contact
with the water.
·
Dry carefully before use.
OPTIONAL: FOOD CONTAINER
·
Clean the lid of the food container a soft damp cloth.
·
You can clean the bottom of the food container in warm water with a mild detergent or in the
dishwasher.
STORAGE
! Do not lock the lid of this machine after use. This could damage the sealing rings, resulting in the
·
vacuum packaging no longer working properly.
·
Place the cord in the cord storage at the back of the machine. Never wrap the cord around the
machine.

PROBLEMS AND SOLUTIONS

The machine will not start?
·
Check if the plug is in the socket.
·
Check if the indicator light is on.
·
The thermal safety is switched on: allow the machine to cool.
The machine does not vacuum the bag completely?
·
Check whether the bag is positioned correctly in the vacuum chamber, but do not cover the air inlet.
·
Check whether the bag is positioned correctly in the vacuum chamber.
36
DO336L

Publicidad

Tabla de contenido
loading

Tabla de contenido