Symbol Description; Panel Introduction - SATA 03005 Manual Del Uso

Symbol description

AC (alternating current)
Caution! Risk of electric shock!
DC (direct current)
Ground
AC or DC
In compliance with EU Directives
Fuse
Meter with double or strengthened insulation protection
Caution with danger! Please read the manual before use

Panel introduction

1. Display
3/4
3 -digit LCD with a maximum reading of 3999
2. "HOLD" button
Press this"HOLD"button once and the meter will enter data hold mode. The
reading is held on the screen and the "
Press this button again, the meter will exit data hold mode and the "
symbol will disappear. Press and hold this button for about 2 seconds to
illuminate the backlight. The meter enters data hold mode at the same time,
the reading is held and the "
the data hold mode, press this button and release it quickly. To turn off the
backlight, press and hold this button for about 2 seconds. In data hold mode,
if you press and hold the button for about 2 seconds, the meter will exit the
data hold mode.
3. "Hz% " button ( only for 03007 model)
Used to measure frequency and duty cycle.
4. Function/position switch
This switch is used to select the desired function or position. It can also be
03005 / 03007
" symbol appears on the screen. To exit
-23-
EN DE RU
" symbol appears on the screen.
KO PT JA ES
"