Home Decorators Collection Brivana MTVS2528W Guía De Uso Y Cuidado página 11

Assembly (continued)
11
inserting the firebox
□
attach the three metal brackets (s) to all three sides
of the firebox and two sides of the mantel to ensure
that your firebox does not move around as you use
it . all three trims attach to the firebox by inserting
and tightening two screws (PP) . Both the left and right side trim
attach to the mantel front by inserting and tightening two screws
(PP) . one spare screw is included .
□
insert the firebox insert (P) into the mantel from the rear . Be very
careful not to scratch the base (B) .
□
viewing from the front of the mantel, ensure that the firebox
insert (P) is in the center of the opening .
12
securing the firebox
□
locate the firebox brace (MM) and place it snuggly behind the
firebox insert (P) to hold it in position . do not cover any air
venting .
□
insert the two large flat head screws through the holes in the
firebox brace (MM) and into the base (B) . tighten until secure .
13
attaching the anti-tip device
□
Push one medium screw (KK) through one washer
(ll) and fasten the nylon strap (nn) to the back of
the top (a) .
□
determine the location of the fireplace and mark the
location on the wall for the nylon strap (nn) screw
holes . Using a drill or screwdriver, make the holes in
the wall where marked .
□
if you are attaching to drywall or plaster, insert a wall
anchor (oo) into the hole in the wall .
□
Push one large screw (ee) through one washer (ll)
and fasten the nylon strap (nn) to the wall .
WarninG: this product is only a deterrent . it is not a substitute for
proper adult supervision .
x3
S
KK
NN
NN
LL
11
Please contact 1-800-986-3460 for further assistance
PP
OO
NN
LL
HOMEDEPOT.COM/HOMEDECORATORS
MM
MM
EE