Step 12 - Mounting the unit to the wall.
RECOMMEND
Wall Mount Kit
Anti-tip Screw
Washers
Nylon Strap
• Fasten the nylon strap to the top of the unit using one washer and the anti-tip screw.
• Fasten nylon strap to wall, using appropriate mounting hardware (not provided).
• NOTE: We recommend using a mounting screw of at least two inches in length. If you do not screw directly into
wall studs, appropriate wall anchors should be used.
Top of the unit
Pg 19 of 38
WARNING:
BEFORE CUTTING OR DRILLING INTO ANY WALL SURFACE, VERIFY THE LOCATION OF ELECTRICAL,
PLUMBING AND GAS LINES. CUTTING ANY OF THESE MAY CAUSE SERIOUS INJURY.
• It is imperative that the unit be fastened to the wall for safety and stability.
• For safety reasons, it is imperative to use a stepladder.
Anti-tip Screw
Washers
Not Included
Nylon Strap
1-800-892-3986
IS9599