General Part; Introductory Informations; Product Description; Definitions - GMV ETC Serie Instrucciones Originales

ENG
4 / 12

0 GENERAL PART

0.1 INTRODUCTORY INFORMATIONS

0.1.1 PRODUCT DESCRIPTION

Thank you for choosing this product; GMV, innovative company, world-wide leader in hydraulic components
for lift design, production and sale, just created, to offer customers all the economic and technical
advantages, but most of all to give more safety and comfort to daily users.
The ETC device is the result of the GMV research.
It is applied to most of the GMV power units equipped with a 3010 valve and is able to reduce the total
energy consumption of the lift system by reducing the leveling time.
The levelling time, is that where the motor runs but the system is in low speed phase. This means that the
motor uses the available energy in small part for lifting, losing it into heat.
At this step starts the capability of the device in order to reduce the energy loss. As a result of this reduction,
managed by ETC, we have the reduction of the FLY time, due to a longer high-speed travel time and a
shorter levelling time, limiting all the energy loss. So we get the best system efficiency.

0.1.2 DEFINITIONS

In this manual you can apply the definitions as indicated in the following standards and regulations:
EN81-20 e EN81-50
EN ISO 12100
UNI EN ISO 7010
EN12016 e EN12015
CEI EN 61439-1

0.1.3 TERMS AND SYMBOLS USED

NOTE
Indicates information which contents must be seriously taken in consideration.
WARNING
Indicates that the described operation is likely to cause, damages to the system or physical damages
if performed without complying with the safety standards.
WARNING
Indicates that the described operation is likely to cause, damages to the system or physical damages
if performed without switch off the main power and complying with the safety standards.
(Electrocution, lightning, etc.).
Space for notes

0.1.4 CLEANING

WARNING
Do not use liquids to clean the electrical parts

0.1.5 DISPOSAL OF MATERIALS

The product contains recyclable materials. Do not disperse in the environment but work in
separate collection (Directive 2006/66/EC).
In particular, the following materials, when replaced, must not be dispersed in the environment but
must be delivered to authorized collection centers, the manufacturer or, preferably certified,
specialized companies.
Electrical and electronic equipment, batteries and / or accumulators, lamps. (RAEE)
10991802 EN - 1.02 - 20.02.2019
ETC S
,
INSTALLATION USE AND MAINTENANCE MANUAL
Safety regulations for the construction and installation of lifts
Safety of machinery - Principles for risk assessment
Graphic symbols: Safety signs and colours
Electromagnetic compatibility
Low voltage switchgear and control gear assemblies (LV control panels)
YSTEM