CAMBRIDGE MaytRx Manual De Instalación página 3

Tools Required for Firewood Box Kit Installation:
Safety Goggles
Ear Protection
Dust Mask
Gloves
Shovels (digging & flat)
Metal Cutters for banding on cubes
Mason Hammer (chipping, hammer)
Road Stone Rake
Tamper (Hand or Mechanical)
Wheelbarrow
Level (2' and 6' recommended)
Speed Square
Caulk Gun 10 oz or 28 oz (depends on what size
adhesive is purchased)
Rubber Mallet
14" Demo saw with diamond blade
Tape Measure
Marking Device (pencil, soap stone, etc)
Chalk Line
Hand Broom
Concrete Tools (Trowel/Floats)
Drill & 1/16" bit
5/16" nut driver
7 ¼" Circular saw with wood blade
4" Electric grinder
4" Diamond cup grinder
4 Carpenter Clamps
Items Included In The Kit:
2- Reinforced concrete lintels 32" x 4" x 8"
3- Plastic shim pack sheet for leveling lintels or
block as needed
4 - 6x6 Imported polished granite tile for facing
front of woodbox
1 - Cube of Maytrx Wall
1- Installation manual for concrete pad and
Maytrx Wall
Cambridge Pre-Packaged / Pre-Cut
MaytRx Wall Firewood Box
Material Required:
¾" Clean stone (approx. 1/2 ton)
Concrete (approx. 3- 80lb bags)
Cambridge concrete adhesive (approx. 2- 29oz.
or 6- 10.3oz. tubes)
(4 pcs) 2"x 4"x 8' Lumber
2 ½" wood screws
½" rebar (approx. 8')
2
2011