Motor Specifications And Electrical Requirements - RIDGID AM25600 Manual Del Usuario

Ocultar thumbs Ver también para AM25600:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 3
CAUTION:
!
• For dusty operations, wear dust mask.
• Do not move or carry Air Mover when it
is operating.
• Only operate on a level and stable
surface to prevent it from falling and
possibly causing injury or damage to unit.
Motor Specifications and
Electrical Requirements
This Air Mover is provided with a 3-speed,
115 volt, 60 Hz induction motor with a
grounding conductor.
protected and will automatically shut down
if over-heated. Once it cools, the motor
will restart automatically if not unplugged.
In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current
to reduce the risk of electric shock.
SAVE THIS MANUAL
It is thermally
Observe the following warnings that
appear on the motor housing of your
Air Mover:
WARNING: To reduce the risk of
!
electric shock, connect only to a
GFCI protected outlet. Do not expose
to water or rain. Indoor use only.
CAUTION:
!
• This Air Mover has an automatic
motor shutoff device; it may
restart without notice. To reduce
the risk of injury, unplug before
servicing.
• Do not use an extension cord with
this fan.
WARNING: TO REDUCE THE RISK
!
OF TIP-OVER DURING STORAGE,
STACK 2-HIGH ONLY.
WARNING:
!
8 Amps through
convenience outlets.
This Air Mover is equipped with an electric
cord having an equipment grounding
conductor and a grounding plug. The plug
must be plugged into a matching outlet
that is properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3
Do
not
exceed
the on-board

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Am22870Am22860

Tabla de contenido