Instructions For Assembly; Safety And Maintenance - Dutchblue 7507 Manual De Usuario

Bath chair with backrest
Water-permeable bath chair with backrest, anti-slip seat and non-slip knobs on the feet.
Material: Powder-coated aluminum frame. 5-way height adjustable seat. Maximum user weight
100 kg. Ideal for every shower.
Composition
Item Description
1 Above tube
2 Under tube
3 Telescopic tube
4 Screw
5 Vaulted washer
6 Screw

Instructions for assembly

1. Assemble together the above tube and under tube according to image 1.
2. Place the seat downward horizontally and place the two fixed tubes into the groove, making
sure that marking 1 corresponds to marking 1 and marking 2 corresponds to marking 2 as
shown in image 2. Place the assembled backrest onto the two fixed foot tubes.
Insert and tighten all screws.
(note: fix the long part of the backrest tube with backrest, the short part with seat)
3.
Place the chair properly and adjust aqually the telescopic tubes to suitable length and make
sure the spring pin is in place before sitting on.
1

Safety and maintenance

Before use, check degree of tightness of all screws and stability of the frame, dont overload
100 kg. Clean it frequently and disinfect it in periodic time. Place it in dry and ventilated
environment.
ENGLISH
Model Quantity
1
1
4
4
M6x55
Ø6 9
M6x35 1
2
dutchblue.
Item Description
7 Backrest tube
8 Screw
9 Backrest board
10 Seat board
11 Spring pin
corresponding
marks
com
Model Quantity
1
M6x30 4
1
1
Ø8 4
3
3