Maxon 297890-01G Manual De Instrucciones página 22

INSTALLING CAMERA AND SENSORS (IF EQUIPPED) - Continued
4. Adjust camera angle (FIG. 22-1)
by bending camera mounting bracket until
image on backup camera display screen
adheres to standard in FMVSS 111.
5. Install each of the OEM sensors (if
equipped) into 4 brackets as shown
in FIGS. 22-2 & 22-2A.
6. Use plastic ties (Kit items) to secure
sensors to mounting brackets as
shown in FIG. 22-2A.
7. Connect OEM sensor harness on the
vehicle to all sensors.
LIFT CORPORATION Sht. 22 of 56 DSG#
OEM SENSOR
(4 PLACES)
SENSOR MOUNTING
(4 PLACES)
CAMERA MOUNTING
BRACKET AND OEM
CAMERA
+/- 40° TILT
ADJUSTING CAMERA ANGLE
OEM SENSOR
SENSOR MOUNTING
BRACKET
BRACKET
INSTALLING SENSORS (IF EQUIPPED)
M-16-32
Rev. C Date: 08/13/19
FIG. 22-1
FIG. 22-2
PLASTIC
TIE
FIG. 22-2A