Whittier Wood Furniture 747Wa Instrucciones De Montaje página 6

T x 4
Fig. 6
6. Attach a Vertical Divider (Aa) to the top side of the Bottom Shelf (Ba) by gluing the Wood Dowels
into the pre-drilled holes in the Bottom Shelf (Ba). Make sure the Rafix Cams (Q) face out
from the unit. From the bottom side of the Bottom Shelf (Ba), use two Screws (T) in the remaining
empty holes, in line with the Vertical Dividers (Aa), to secure the piece together. See Figure 6.
Repeat this step for the other Vertical Divider (Aa).
Ca
Fig. 7
7. Attach the Left Side (Ca) to the Bottom Shelf (Ba) by sliding the Rafix Bolts (R) into the Rafix
Cams (Q). Tighten the cams. Repeat and attach the Right Side (Da) to the Bottom Shelf (Ba). See
Figure 7.
Page 6 — 747Wa — 06/11
Q
Aa
Ba
T
Aa
Q
Q Ba
Stain Test Area
Aa
Q
T
T
Aa
T
Da
Q
R
Q
R
Q
x4