Final Installation - Harbor 40141 Manual Del Usuario

FINAL INSTALLATION

1. Temporarily lift the motor housing (A) to the mounting
bracket (B) to determine which two motor housing
screws (HH) in the sides of the mounting bracket
(B) align with the slotted holes in the top edge of the
motor housing (A). Partially loosen the two motor
housing screws (HH) that align with the slotted holes.
Remove the other two motor housing screws (HH)
from opposite sides of the mounting bracket (B).
Hardware Used
Motor Housing
HH
Screw
2. Slide the motor housing (A) over the motor (D),
aligning the slotted holes in the motor housing (A)
with the loosened motor housing screws (HH) in the
mounting bracket (B). Twist the motor housing (A)
to lock. Then re-insert the two previously-removed
motor housing screws (HH) and securely tighten all
screws.
Hardware Used
Motor Housing
HH
Screw
3. Partially insert three blade screws (BB) and blade
washers (CC) through a blade (H) and into a blade
arm (G). Tighten each blade screw (BB), starting
with the one in the middle. Repeat this step for the
remaining blades (H) and blade arms (G).
Hardware Used
BB
Blade Screw
CC
Blade Washer
1
HH
x 4
2
HH
x 4
3
BB
CC
x 15
G
x 15
11
Lowes.com/harborbreeze
B
HH
A
B
A
D
H