Initial Installation - Harbor 40141 Manual Del Usuario

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Ensure the blades (H) will be at least 30 in. from any
obstruction and at least 7 ft. above the floor.
3. Secure the upper mounting bracket (B) to the outlet
box using screws, spring washers, and flat washers
provided with the outlet box (not included).
Note: It is very important that you use the proper hardware
when installing the mounting bracket (B) as this will
support the fan.
1
2
7 ft. Min
3
B
7
Lowes.com/harborbreeze
30 in. Min
H