Closing The Ladder - Workzone 4SHL17U Manual Del Usuario

Closing the ladder

1. Hold the ladder upright so that it is standing on the front two support feet
2. Open the ladder by pulling the supports
3. Firmly push the platform
lateral brace
Make sure that the locking lever
(see Fig. C) and the securing strap
The ladder is now positioned on all four support feet
platform and the rungs
stepped on.
You have successfully set up the ladder (see Fig. A).
Use the storage tray
(see Fig. E).
Closing the ladder
CAUTION!
Risk of crushing!
You could crush your fingers when closing the ladder.
− Make sure that you take hold of the rails and supports
when closing the ladder.
1. Push downwards the locking lever
platform 3
2. Tilt the ladder forward so that it rests on the front support feet
3. Close the ladder completely by pulling the supports
You have successfully closed the ladder.
14
3
(see Fig. B).
9
8
have now been set up securely and can be
from the top lateral brace
4 all the way back from the rails
downwards so that it sits securely on the top
10 rests firmly on the top lateral brace
is fully stretched (see Fig. D).
6
1 to store small parts (e.g. screws)
(see Fig. F), and lift up the
10
9
.
7
and . The
5
7 .
4 towards the rails
7 .
2 .
2 .