Power Supply Specifications; Environment Operating Conditions; Serial/Batch Number; Record Table - Terragene Bionova IC10/20FR Manual Del Usuario

Safety information

Power supply specifications

Operating
Input parameters
Condittion
(100-240)
Voltage range
50/60
Frequency
0,2
Current
Values
Output parameters
12
Voltage
4
Current
Terragene® recommends using a UPS instead of stabi-
lizers, since the former has two functions: it stabilizes
and provides a continual power source during energy
cutoff.

Environment operating conditions

Environmental conds.
Altitude
Operation temperature
Relative humidity
Installation/overvoltage
Degree of contamination
Storage temperature
Voltage

Serial/Batch Number

For easy identification, each IC10/20FR incubator has
a unique serial number and a batch number printed
on a label found at the bottom of the incubator and
on its packaging. Please, register your serial number
and batch number in this manual for future reference:
Serial Number:
Batch Number:

Record Table

Use the following table to record firmware updates.
NOTE: manufactury firmware is printed on a label found
on the bottom of the incubator and on its packaging.
Units
Volts
Hertz
Ampers
Units
DC Volts
Ampers
Functional conds. Units.
3500 (máx.) Meters
10-30 ºC
30-80 %
category II
2
0 - 50 °C
12
DC volts
IC10/20FR Page 5
Please, register your manufactory firmware in this ma-
nual for future reference:
Manufactury Firmware:
Version
Date Operator