Alcad STB-050 Manual página 27

There we would choose the file that we have previously prepared and we would press OK.
We will see that depending on the color of the button that we press, the action will be different. The most impor-
tant buttons would be F3 and F4.
• F3: Add the channels of the file to the STB. The order of the channels of the file will determine the channel
order.
• F4: Remove all the channels of the STB. This action is important when you want to edit a existing channel. For
modifying them, the best would be to remove all of them and add the channels again.
After adding the channels, we would go back to the IPTV channel section, which is in the main menu. This is
achieved pressing the button
nels, which would show the current channel list.
Let's suppose that we have a STB with the channels configured but that we have lost the ,m3u file... We
would have two options, or configure a new file or to take the channel list from the configured STB. For that
we would connect the USB to the STB and from the IPTV channels section we would the key sequence:
That would show a small windows in the rigth side called Operations; that window would have multiple choices
and one of them would be 'Export Channels':
EN
Pic. 18 - Open Playlist
repeatedly until reaching that menu and choosing the menu entry IPTV chan-
Pic. 19 - Open Playlist
ALCAD STB-050 Manual - 27