Schwaiger NWSW8 Manual De Instrucciones E Indicaciones De Seguridad página 14

USER MANUAL NWSW8 011
Connecting a Computer to the Network Switch
Connect the RJ45 network ports of the network switch to the corresponding
connections on your computer (or other devices with network connections, e.g.
TV, satellite receiver, game consoles, etc.). Once the devices are connected and
the connection is correct, the Link/Act status indicators of the corresponding
ports of the network switch on the front panel light up.
10. Technical Data and Operating Environment
Standards
Protocol
Data transmission
rate
Network cable
Power supply
Temperature and
Humidity
14
IEEE 802.3 10Base-T-Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
ANSI/IEEE 802.3 Nway Auto-Negotiation
IEEE 802.3X traffic control
CSMA/CD
Ethernet: 100 Mbit/s(half-duplex),
200 Mbit/s (full duplex),
Fast Ethernet: 1000 Mbit/s (half-duplex),
2000 Mbit/s (full duplex)
100 BASE-T: 2-Pair UTP Cat. 3, 4, 5; EIA/TIA-568
1000 Ohm STP
1000 BASE-TX: 2-Pair UTP Cat. 5; EIA/TIA-568
1000 Ohm STP
1000 BASE-FX:62.5/125 micron multimode fibre
optic cable
External power supply 5 VDC / 1 A
Operation: 0~60°C, Storage: -10~70°C
Humidity of the air: 10-90%, Storage: 5-90%