EasyStand Zing size 2 Manual Del Usuario página 18

37. Loosen knobs on the tray brackets and
flip open the gray latch all the way as shown
below.
38. Lock the casters, insert the two tray
arms into the tray bracket on the bottom of
the tray as shown. Flip gray latch closed,
and tighten knob securely.
Caution: After placing the tray into position,
!
ensure the ratchet handles on both sides of
the tray are tightened securely.
39. If the swing-away tray was
ordered follow steps 39-42, using a wrench,
remove the nut from the bolt on the tray arm
and discard the nut. Make sure all other
hardware stays on the bolt.
Página 15
MPS, Supine, TT
37
MPS, Supine, TT
38
MPS, Supine, TT
39